Operating Conditions for the United Kingdom

Operating Conditions for the United Kingdom

In addition to the warnings and safety guidelines listed in the "Translated Safety Warnings" section, the following warnings apply to routers used in the United Kingdom:

•Interconnection directly, or by way of other apparatus, of ports marked:

"Safety Warning—See instructions for use"

with ports marked or not so marked may produce hazardous conditions on the network, and that advice should be obtained from a competent engineer before such a connection is made.

•The ports marked "Ethernet" and "Console" have a safety warning applied to them as follows:

"These ports do not provide isolation sufficient to satisfy the requirement of EN 41003; apparatus connected to these ports should either have been approved to EN 41003 or have previously been evaluated against B5E301 British Telecommunications plc (Post Office) Technical Guides 2 or 26 and given permission to attach; any other usage will invalidate any approval given to this apparatus."

Other usage will invalidate any approval given to this apparatus if as a result it ceases to comply with EN 41003:1993.

•This apparatus must be connected to a main socket outlet with a protective earth contact.

•Connection of power supply: The router is intended for use when supplied with power from a supply providing 100 to 250 VAC, 50 to 60 Hz up to 0.5A.

Declarations of Conformity

The Declarations of Conformity related to this product are located at the following URL:

http://tools.cisco.com/cse/prdapp/jsp/externalsearch.do?action=externalsearch&page=EXTERNAL_SE ARCH&module=EXTERNAL_SEARCH

Conformité Européenne (CE) Marking Directive

This product bears the CE mark in conformance with Annex VII of Directive 1999/5/CE.

European Union Statements

The following statements apply to Cisco 801 routers and Cisco 803 routers used in the European Union (EU).

Network Termination Point Statement

This product does not contain a "Network Termination Point" (NTP) as defined by ETSI 300 386-2. This product is classified by the manufacturer as "Terminal Equipment." If you have any additional questions, please contact your local network operator.

ISDN S/T Ports Statement

These ports have not been classified as "directly connected ports" to outside cables as defined by CISPR 24, 1997 by the manufacturer. If you have any additional questions, please contact your local network operator.

California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33)

The battery inside this product might contain perchlorate, a known hazardous substance, so special handling and disposal of this product might be necessary. For more information about perchlorate and best management practices for perchlorate-containing substances, see http://www.dtsc.ca.gov/HazardousWaste/Perchlorate/index.cfm.

Compliance Statements for Canada

Canadian Class B Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of the Department of Communications.

Cet appareil numérique respecte les limites de bruits radioelectriques applicables aux appareils numériques de Classe B prescrites dans la norme sur le materiel brouilleur: "Appareils Numériques," NMB-003 edictée par le ministre des Communications.